Commercial PSP Filters

Commercial-Grade Mechanical and Biological Pond Filtration with Optional Automatic Backwash Valve

Commercial PSP Pond Filters are specifically designed for "Heavy-Solid Waste" applications in large pond systems with heavy fish loads. Typically commercial projects. Similar to its smaller counterpart, the PSP Filter, Commercial PSP Pond Filters are also multi-functional filters accomplishing both, mechanical and biological filtration due to the use of FilterCLAY media. Enlarged Filter Lateral openings increase media bed circulation and allow for the use of larger filter media, such as our FilterCLAY. This combination of specialized filter laterals and our 4-8 mm FilterCLAY provides better solid waste capture and a more effective backwash when compared to other filter media's like fine sand. Commercial PSP Pond Filters are available in either, top-mount or side-mount valve styles with high-quality, "Spun-Wound Fiberglass" construction that offers exceptional durability. Available in eight sizes with a maximum flow rate of 300 GPM, there is a Commercial PSP Pond Filter to suit any large application. Calculate your ponds size.

Optional Automatic Backwash Valve
Combined our optional, E-6000F Series Automatic Backwash Valve with any of our Commercial PSP Pond Filters for a completely automatic system. E-6000F Series Automatic Backwash Valves are timer or pressure controlled (adjustable) systems that house both, the valve actuator and the controller in one enclosure. An integrated touchpad switch allows the operator to initiate standard operating commands that include backwash/rinse and drain or pump shutoff. Equipped with adjustable potentiometers to set backwash and rinse durations, the
E-6000F Automatic Backwash Valve gives the operator control of his own specifications (Backwash: 1-11 minutes and Rinse: 20 seconds to 4 minutes).

The SSM-EA-50 pump controller with a 50 amp capacity is required to operate the E-6000F Series Valve. The valve's internal pump relay is wired to the SSM-EA-50 Pump Controller that controls the on/off sequence of the pump during the valve's backwash and rinse cycles.

For Best Filtration Results
First, maximize the circulation inside the pond by utilizing several clean water returns, this will increase water circulation and help to suspend solid waste. Suspending solid waste in the pond helps it reach the bottom drain or surface skimmer, where it is then carried to the Commercial PSP Pond Filter. Additionally, Commercial PSP Pond Filters are "fixed-bed" filters and require a high-pressure pump (high RPM) equipped with a strainer basket. Properly match the pumps flow rate to that of the pond filter (See "Commercial PSP Pond Filter Specifications" chart below). PSP Filter installation.

PSP Pond Filter Specifications

PSP Pond Filter Specifications

PSP Pond Filter Specifications

PSP Pond Filter Specifications

Automatic Backwash Valve