HydraSCAPE:
The Only "Fully Automated"
Filtration System Available!

HydraSCAPE Skid-Mounted Filtration Systems combine "Commercial-Grade" design and components, delivering dependable automatic operation. This state-of-the-art turn-key filtration system features solid waste (mechanical) filtration and UV treatment with automatic operation. This results in increased filtering performance, yet reduces labor.

HydraSCAPE Systems are electrically and hydraulically tested before leaving our facility. They are shipped fully assembled and ready for on-site installation.

HydraSCAPE Filter Systems require a level platform for proper operation. Provide the HydraSCAPE with safe outdoor-rated electrical receptacles. Use multiple clean water returns which direct water back to the pond to create maximum circulation. This will help to suspend solid waste and allow it to reach the skimmer/drain, and ultimately, the filter.

HydraSCAPE Filter Systems should be considered when automatic operation is desired. HydraSCAPE Systems are available in sizes capable of treating applications up to 55,000 gallons. They are best suited for ornamental ponds, mammal/reptile and avian bathing pools.

HydraSCAPE
Advantages

• Exclusive EAI Control/Monitor
  Command Center operates
  the entire system based upon
  the operator's commands
  that are placed into the
  system's microprocessor.
• PSP Filters are designed for heavy solid waste applications and
  feature a lateral design that maximizes media bed filtering
  and backwashing
• Optimal UV Treatment
  provides protection against
  harmful waterborne bacteria
  and nuisance algae. VSE
  High-Output UV System
  features multi-lamp/
  single-vessel UV housing
  which minimizes
  increased pressure.
• NEMA 4X Rain-Tight Power
  Enclosure houses the
  Control/Monitor Command
  Center and features external
  pump and UV system
  Power Switches. Also
  includes an external LED to
  alert of a possible
  backwashing problem.

View This Catalog Page

features a commercial design, durable construction and an efficient multi-lamp array that utilizes the lamp's UV output to it's maximum potential.

simplifies filter maintenance by using a timer or pressure controlled activation, with adjustable backwashing and rinsing.

are located at the front of the skid, within inches of each other to reduce excess plumbing.

increase circulation within the media bed
and achieve a more effective filtering and
backwash functionality.

as shown to the right with a 6.0 gram per hour integrated Ozone Generator, complete with oxygen concentrator, ozone contact manifold and UV Controller/Monitor.

• Commands, set by the operator, control the pump and automatic backwash valve operation. The controller turns the pump on and off during valve operating cycles (filter, backwash and rinse).
• Pressure Initiated Backwashing is triggered by pressure inside the filter reaching the operator's "pressure set-point". Timer Initiated Backwashing is triggered by the operator's "time set-point" (between 3 and 168 hours).
• Backwash and Rinse Cycles are also based on operator-set commands with backwashing (between 1-10 minutes) and rinse (between 30-300 seconds)
  duration settings.
• Backwash Counter provides backwash frequency history.

• UV Lamp Status Screen displays lamp operation (on/off status).
• Lamp Hours Screen displays total lamp operating hours for each individual lamp.
• Voltage Range Screen displays "default" voltage set points as well as actual voltage. When voltage falls outside of the set-points, the UV shuts down automatically.
• Water Temperature Control (Over Temperature Shut-Down) monitors water temperature inside the UV housing, shutting it down if the water temperature exceeds the default set-point of 120° F. This protects the UV from damage due to overheating.
• Output Data Ports send data or alarm information to external sources.
• Optional UV-C Output Intensity Meter.

• Return To Top